- 1.
HOOK. Attach the yellow
straps around or to a support. The yellow straps have clip hooks on
the ends
to clip together to form a loop or attach directly to a support object.
Recommended supports are around are:
fences, luggage racks of vehicles, trees and eyebolts attached to walls
or structures.
- 2.
PULL. Pull out on the
handle of the SportsShade housing until the awning material is completely
extended
and can pull out no further. SportsShade must be completely extended
to be held in place by the guy lines.
- 3.
SWING. Pull down on
the legs, which are held horizontal by black clips and swing them vertically
into place.
The legs should be perpendicular to the housing for correct use. The
SportsShade housing and legs should be
placed at a slight incline to keep the awning extended while placing
the guy-lines with stakes (See picture 4 on the box).
-
4. STAKE. One person should hold the SportsShade
upright until the guy lines have been staked down.
Pull each guy line until it is fully extended at an approximate angle
of 45 degrees from the support legs.
Place the stake perpendicular to the ground and drive it into the soil
until the collar is touching soil.
Do not use stakes in sand or mostly sandy soil. It is recommended to
use SportsShade weight bags (sold separately).
Please note that Inventive Ideas(tm) is not responsible damage or injury
cause by any modification made to the SportsShade.
|
